Multiswitch / SAT C 110 PROBLEM

[phil1995]

I have a direcway system with a SAT A, SAT B and SAT C Direcduo kits installed. I am able to pick up the 119 and 101 sat with no problem. I can not pick up any signal strength at all on the 110 sat.

My setup is as follow.

Both feeds of the 101 sat (A) are going to the 13 & 18V side of the Sat A side of the switch. One 119(B) feed is going directly to the 13 V side of the sat B , and the other 119 feed is going to the SAT B side of the SAT B/C Combiner. The 110 lead is going to the SAT C side of of the SAT B/C combiner. The output of the SAT B/C Combiner is going to the 18V side of the SAT B multiswitch.

The multiswitch is a Channel Master 69041 FD. The lnbs are DWUK-A2, DWUK-B2 and not sure the model number of the Sat C. The lnbs were bought as a DirecDuo kit. The writing on the lnb says "COMPATIBLE WITH DIRECTV MULTI-SATELILITE & DIRECTV PARA TODOS DISH ANTENNAS."
Any suggestions would be greatly appreciated.

[DirecTuneup]

I have a direcway system with a SAT A, SAT B and SAT C Direcduo kits installed. I am able to pick up the 119 and 101 sat with no problem. I can not pick up any signal strength at all on the 110 sat.

My setup is as follow.

Both feeds of the 101 sat (A) are going to the 13 & 18V side of the Sat A side of the switch. One 119(B) feed is going directly to the 13 V side of the sat B , and the other 119 feed is going to the SAT B side of the SAT B/C Combiner. The 110 lead is going to the SAT C side of of the SAT B/C combiner. The output of the SAT B/C Combiner is going to the 18V side of the SAT B multiswitch.

The multiswitch is a Channel Master 69041 FD. The lnbs are DWUK-A2, DWUK-B2 and not sure the model number of the Sat C. The lnbs were bought as a DirecDuo kit. The writing on the lnb says "COMPATIBLE WITH DIRECTV MULTI-SATELILITE & DIRECTV PARA TODOS DISH ANTENNAS."
Any suggestions would be greatly appreciated.


What are you using as a power meter? It sounds like you have the older style feeds that are seperate from each other.With this set up, if you are using a Birddog power meter, you have to connect directly at the output of the 110 feed.You can connect the BD to one of the multiswitch outs.

[Satellite Tech]

Did you ever have signal on the 110? If not, it sounds like you do not have the special Sat C LNB. It is different then the regular single or dual feed LNBs. You cannot use a regular LNB with this setup.

Hope this helps!!