PDA

View Full Version : Static in reception


LSUBleauxs
December 19th, 2005, 11:06 AM
Is there any way to not have this static? Its an audiovox with just the antenna and power source to the cig lighter. Little help? Thanks.

S.I.N.Y.
February 13th, 2006, 08:48 PM
assuming your using the fm modulator, have you tried any other fm stations?
I get different results with different radios and need to use diff stations
Also if you can move the reciever around ,sometimes different positions will clear things up a bit...
Otherwise if you have a cassette deck in the car try using a cassette interface and you shouldnt have any static providing your getting good signal strength
Good Luck

superstar221
April 8th, 2006, 03:50 PM
Buy a better unit than audiovox...then try all the fm stations. If that doesnt work get the antenna plug in for a direct connection...if that doesnt work hard wire the power supply...if that doesnt work buy a Sirius unit..they are much better quality. If that doesnt work, have fun with regular radio.

roban
January 5th, 2008, 02:02 PM
I have a similar problem with XM but mine sounds like ignition noise. I use Sure Connect and probably have to shield the cable somehow.

MattB
January 27th, 2008, 08:15 PM
I have a similar problem with XM but mine sounds like ignition noise. I use Sure Connect and probably have to shield the cable somehow.

I would try a few different fm stations. That will probably help.