PDA

View Full Version : What do I need and how to do it?


kbounds
March 18th, 2006, 06:21 PM
First let me state that I have set up and installed several single and dual lnb installations however I have not come across the following senerio yet, until now.

I'm in area code 30824 (Augusta, GA). I want to get normal (non HD) programming and local channels. I previously had a dual LNB set up at this location but it would not get local channels. In discussions with DTV they stated that locals were on a different bird (72.5) and that I would need an oval dish to recieve. I already had a round 18", dual lnb.

I went out and purchased an oval triple lnb with a zinwell 4x8 switch.

My questions:

Do I have the right equipment?
Which dish should I point where?
Can I take two leads from each dish and connect them to the zinwell switch? (one each to the 13v and 18v inputs)

I have attempted for 2 months to get an installer out here to no success. No one will return calls or they are out of business (I have my own equipment). I would have paid for this to be done but now am resolved to do it myself.

I guess I don't really understand how the 72.5 bird fits in this equation (or if it applies to me at all)

Thanks in advance for any help.

kbounds
March 18th, 2006, 06:50 PM
It may be helpful: I'm in McDuffie County

Do I even need the 3 lnb dish? Could this be easier with 2 dual lnbs?