Dish 500 - Can't Get 119 Signal

[diggity801]

I installed a dish 500 with the pro lnb a few days ago and I have only been able to get 110 in.
I ran one wire from the 119 side(left side of the lnb) because it has the internal switch. So far 110 comes in great but I have not been able to get any quality for 119. I set the 119 port for 1 and the 110 port for 2. I am wondering, is it possible that the skew is off even though i have it set for 114 (what dish network suggested)? Also i am looking at transponder 2 for 119.

[LXSWRX]

Sounds like you are not far west enough if you're only getting the 110.
Set the signal strenth screen to sat 119 trans 11 and try repointing the dish a little more to the west.

Try setting the screw to about 94. and ell to 42-45