PDA

View Full Version : Even Trasp.only / Sat 101


MILBY
September 17th, 2001, 04:24 PM
I have the 18x24 oval sat dish, 4x4 multiswitch, Sony A-55 receiver, the NewEea3.31.

The signal are in the 90's ( 101 and 119 ) but the signal I getting for 101, is coming for the odd trnsport's only, and no signal for evens.

Please appreciate your advise.

thanks. :Z

superzap
September 17th, 2001, 04:48 PM
You probably have a cable problem, either a short or open connector. No splitters can be anywhere in the cables.

Riso
September 17th, 2001, 08:03 PM
My buddy had this exact problem. We checked the cable it was ok. It turned out he had run the cable from sat dish into vcr and then to the receiver. You probably have not done this but if you are using any couplers, splitters or A/B switches be sure that they can pass DC voltage.The LNB's use 18v & 13v DC. If you loose one or the other you will only get half of your channels.

hulon
September 17th, 2001, 08:03 PM
does your dish have the built in multi switch if so you do not need the 4x4 switch just hook direct to lnb

Union
September 19th, 2001, 07:26 PM
Make sure you have the LNB wired correctly LNB 1 LNB 2. Good Luck!

smack
September 21st, 2001, 03:09 PM
Check that the combiner (from the 110 and 119) are attached to the 18VDC input connection of the multiswitch. It won't work on the 13VDC side.

Good Luck

Scott

ltcbm
September 21st, 2001, 03:15 PM
scott's right. run into same thing, instead of asking i figured out myself which worked good but took me three times as long

MILBY
September 22nd, 2001, 07:17 PM
Thank you all.

smack, you'r right, 18/18, 13/13VDC.
( I did fix my mess )

superzap, you'r right
( I had one of the lnb/multiswith, cables not working. )