4x4 multiswitch

[bmwsuv]

I want to install a oval dish, but am confused by 4x4 multiswitch.
I know LNB A should be connected to A side , LNB B to B side.
But what's the difference between 13V and 18V ?
What's the right way to connect those 4 cables from LNB's to multiswitch ?
Help is much appreciated.

[smack]

Aside from putting the "A" side LNB connectors to the "A" side of the MS (and the "B" LNBs to the "B" side), it makes no difference which "A" cable or "B" cable goes to the 13VDC and 18VDC connectors since you're using dual-LNBs on each side.

There's actually two seperate LNB units under the cup, either LNB can do either voltage.

Good Luck

Scott

[bmwsuv]

thanks!